The size of the current screw has been a certain amount of space to adjust. From M1 to M8 range, and for special screws, have a space to operate, designed separately. Now the screw machine has been very mature technology, so the phenomenon of card screw machine has rarely occurred again. Such as the phenomenon of missed miss screws, will automatically alarm, so the workers to reduce the work to do the work of the phenomenon. Now the screw machine equipment, in the feeding system and vibration drive independent control, can be free to set the ideal time to stop the time, when the abnormal situation, the screw machine will start the fault alarm function! Operation and other screw machine as simple.

    When you remove the screw, the screw head position, as long as the head into the head of the head, along the guide down, and then pull out the front of the screw can be compared to the traditional screw disk, each screw can save 1.4 Seconds to seek productivity up to 6 times, easy to operate, even if the novice can immediately learn how to operate, do not have to correct the screws, just put the screw into the feed room can be.

    Widely used in a variety of electronics industry, automotive, television sets, air conditioning and other industries need screw.

    Screw machine features a lot, generally have the following aspects:

    1, the extraction of screws, as long as the tip of the grant into the approved Tsui guide, down along the guide bearing down, and then pull the user to the direction of the user can pull out.

    2, compared to the traditional screw plate, extract each screw can save 1.4 seconds, it can improve the production efficiency of 4 times.

    3, easy to operate, the initial user can learn how to operate in real time.

    4, widely applicable to all types, different lengths and head shape of the screws. (The current length is basically less than 20mm)

    5, small body, an operator can operate multiple screw conveyor at the same time.

    6, easy to use, the screw supply smooth

    7, replaceable rails

    8, because the level of delivery, special screws can also be applied

    9, applicable to the manufacturer's standard head

    Screw machine work, due to vibration reasons, the machine itself may be loose screws, if you can, it is best to use the screws in each machine before the tightening, so as to avoid loose position caused by the occurrence of various conditions such as the occurrence of The